Tectyl™ 210-R

Version: TE021/02

Premium amber colored, wax based, corrosion preventive compound

Tectyl 210-R is an amber colored, solvent cutback, wax base, thixotropic corrosion preventive compound.

Tectyl 210-R is designed for protection at factory level of enclosed boxes, seams, joints and other creviced locations of vehicles, susceptible to corrosion.

Tectyl 210-R cures to a semi-hard, waxy, light amber colored, translucent slightly tacky film.

Approvals/Performance levels

Accelerated Corrosion tests: @ Average recommended DFT
Accelerated Corrosion tests:

Salt Spray; 5 % NaCl @ 35°C; ISO 9227 NSS
(Q-Panels, Type R, ASTM A1008)
At leat 21 days

Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH
(Q-Panels, Type R, ASTM A1008)
At least 100 days

Estimated Protection Period: Indoor: 24 months
Tectyl 210-R when dried and cured, can be used from -20 -100 °C  

 

Applications

Surface preparation

The maximum performance of Tectyl 210-R can be achieved only when the metal surfaces to be protected are clean, dry and free of rust,
oil and mill scale. Valvoline recommends that the metal substrate temperature is 10-35 °C at the time of product application.

Application

Tectyl 210-R is formulated to be used as supplied. Ensure uniform consistency prior to use. Continued stirring is generally not required.
Do not thin Tectyl 210-R. Incorrect thinning will affect film build, dry time and product performance. Valvoline recommends that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl 210-R can be applied by low pressure air spray.
Details on application can be found in the application chart.

Removal

Tectyl 210-R can in the wet phase be removed with Tectyl Biocleaner, Valvoline 150 or lowpressure steam. If dried and cured the film of Tectyl 210-R can also be removed with Tectyl Biocleaner or Valvoline 150.