Tectyl™ 127 CGW
Premium wax based, corrosion preventive compound
Tectyl 127 CGW is a solvent cutback, wax based, thixotropic, gelled, aluminum pigmented corrosion preventive compound.
Tectyl 127 CGW can been used to give long term protection of metal surfaces against corrosion in weathering, moist and salt corrosive atmospheres.
Tectyl 127 CGW cures to a firm, non-tacky, resilient, tough film with aluminum color.
Approvals/Performance levels
| Accelerated Corrosion tests: | @ Average recommended DFT |
| Accelerated Corrosion tests: |
Salt Spray; 5 % NaCl @ 35°C; ISO 9227 NSS Humidity; 100 % RH; @ 40°C; ISO 6270-2 CH |
| Estimated Protection Period: | Indoor: 36 months Outdoor: 24 months |
Applications
Surface preparation
The maximum performance of Tectyl 127 CGW can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Valvoline recommends a substrate temperature of 10-35 °C at the time of product application.
Application
Tectyl 127 CGW is formulated to be used as supplied. It is recommended that the ambient and product temperature be 10-35 °C at the time of product application. Tectyl 127 CGW can be applied by airless spray or brush. Details on application can be found in the application chart.
Removal
Tectyl 127 CGW can be removed in the wet phase with Tectyl Biocleaner, Valvoline 150 or low-pressure steam. If dried and cured, Tectyl 127 CGW the film can be removed with Valvoline 150.